> For the complete documentation index, see [llms.txt](https://kwf.gitbook.io/kwf-wildlife-portal-docs-1/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://kwf.gitbook.io/kwf-wildlife-portal-docs-1/mobile/creating-a-camera-station.md). # Creating a Camera Station Full guide on creating a camera station Once you boot up the mobile application, the first page you will see is a section with all of your studies that you created on the desktop application. ## Study Page

The study page is shown above. Once you locate your study, click on it. This will take you to the following page:

In the bottom right, you can select the create station button, which will take you to the create camera station screen.

Here you can create your camera station, filling out all necessary fields. ## Components of Creating a Camera Station You will be first asked for general data, which is the: 1. Cam ID 2. SD-ID 3. Watershed After that, you can toggle whether your camera is currently operating. Once that is completed, you will have the option to automatically collect your location or manually input it. If you want your located to be automatically collected, then toggle the auto collect location button. If not, you will have to fill out the longitude and latitude fields. You will then be prompted to input your field information for: * Lure * Habitat * Terrain * Substrate Then you will be asked to input the station potential, choosing from either good, medium, or low. Finally, you can type any extra notes or signs at the station that you see.